 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor Dual Common-Cathode Ultrafast Plastic Rectifier TO-220AB ITO-220AB FEATURES * Glass passivated chip junction * Ultrafast recovery time * Soft recovery characteristics * Low switching losses, high efficiency 2 UG8xCT Series PIN 1 PIN 3 PIN 2 CASE 3 1 UGF8xCT Series PIN 1 PIN 3 PIN 2 2 3 * High forward surge capability * Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) * Solder dip 260 C, 40 s (for TO-220AB and ITO-220AB package) * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 1 TO-263AB K 2 1 UGB8xCT Series PIN 1 PIN 2 K HEATSINK TYPICAL APPLICATIONS For use in high voltage and high frequency power factor corrector, freewheeling diodes and secondary dc-to-dc rectification application. MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 4Ax2 500 V, 600 V 65 A 25 ns 1.50 V 150 C MAXIMUM RATINGS (TC = 25 C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum working reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min SYMBOL VRRM VRWM VRMS VDC IF(AV) IFSM TJ, TSTG VAC UG8HCT 500 400 350 500 8.0 65 - 55 to + 150 1500 UG8JCT 600 480 420 600 UNIT V V V V A A C V Document Number: 88766 Revision: 09-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) TEST CONDITIONS IF = 4 A IF = 4 A TJ = 25 C TJ = 125 C TJ = 25 C TJ = 100 C TJ = 125 C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 1.0 A, dI/dt = 50 A/s, VR = 30 V, Irr = 0.1 IRM IF = 4.0 A, dI/dt = 240 A/s, VR = 400 V, Irr = 0.1 IRM IF = 4.0 A, dI/dt = 32 A/s, VR = 400 V, TC = 125 C IF = 4.0 A, dI/dt = 240 A/s, VR = 400 V, TC = 125 C IF = 4.0 A, dI/dt = 64 A/s, VF = 1.1 VF max. SYMBOL VF UG8HCT 1.75 1.50 30 800 4 25 50 0.9 3.0 8.0 500 UG8JCT UNIT V A A mA ns ns A A ns Maximum DC reverse current per diode at VRWM IR Maximum reverse recovery time per diode Maximum reverse recovery time per diode Typical softness factor (tb/ta) Maximum reverse recovery current per diode Maximum reverse recovery current per diode Peak forward recovery time per diode Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle trr trr S IRM IRM tfr THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case per diode SYMBOL RJC UG8 3.5 UGF8 6.0 UGB8 3.5 UNIT C/W ORDERING INFORMATION (Example) PACKAGE TO-220AB ITO-220AB TO-263AB TO-263AB TO-220AB ITO-220AB TO-263AB TO-263AB Note: (1) Automotive grade AEC Q101 qualified PREFERRED P/N UG8JCT-E3/45 UGF8JCT-E3/45 UGB8JCT-E3/45 UGB8JCT-E3/81 UG8JCTHE3/45 (1) UGF8JCTHE3/45 (1) UGB8JCTHE3/45 (1) UGB8JCTHE3/81 (1) UNIT WEIGHT (g) 1.85 2.00 1.35 1.35 1.85 2.00 1.35 1.35 PACKAGE CODE 45 45 45 81 45 45 45 81 BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape and reel Tube Tube Tube Tape and reel www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88766 Revision: 09-Nov-07 New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 12 10 000 Average Forward Rectified Current (A) 10 UG8JCT, UGB8JCT 8 Instantaneous Reverse Current (A) 1000 TJ = 125 C 6 UGF8JCT 4 100 TJ = 100 C 10 TJ = 25 C 2 P.C.B. with 7.5 x 7.5 x 0.3 cm Copper Pad 0 25 50 75 100 125 150 0 1 0 20 40 60 80 100 Case Temperature (C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Reverse Leakage Characteristics Per Diode 100 100 Peak Forward Surge Current (A) 80 60 Junction Capacitance (pF) 10 40 20 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 1 1 10 100 0 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode Stored Charge/Reverse Recovery Time (nC/ns) 100 140 120 100 80 50 A/s 60 40 240 A/s 20 0 25 50 75 100 125 150 50 A/s 60 A/s Qrr Trr IF = 4 A VR = 30 V dI/dt = 240 A/s Instantaneous Forward Current (A) 10 60 A/s 1 0.1 TJ = 25 C max. Pulse Width = 300 s 1 % Duty Cycle 0.01 0.5 1.0 1.5 2.0 2.5 Instantaneous Forward Voltage (V) Junction Temperature (C) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Reverse Switching Characteristics Per Diode Document Number: 88766 Revision: 09-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product UG(F,B)8HCT & UG(F,B)8JCT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45 REF. 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 7 REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.600 (15.24) 0.580 (14.73) PIN 0.671 (17.04) 0.651 (16.54) 7 REF. 0.350 (8.89) 0.330 (8.38) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 1 2 3 7 REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.191 (4.85) 0.171 (4.35) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88766 Revision: 09-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of UG8JCT-E345
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |